randy thompson

ARRI_Reference_Tool_GUI_1_4_0_Release_Notes.pdfHow to adapt any LUT for the Alexa 35 Cullen Kelly shows how to make a lut compatible with the Arri Alexa 35 camera with the new Lut creation workflow inside of the ARRI Reference Tool version 1.4 Link to ARRI Reference Tool version 1.4 download ARRI Reference Tool | Learn & Help Link to ARRI Reference Tool version 1.4 PDF linked below.ARRI_Reference_Tool_GUI_1_4_0_Release_ARRI_Reference_Tool_GUI_1_4_0_Release_Notes.pdfNotes.pdf

You're welcome David!

Here is the same workflow I suggested to David Gomez Ojeda in another thread with Screengrabs and instructions on REDUSER of how to do what you wanted. Aces as either a Project setup or Aces as a Node based setup with "ACES Transforms" for in and outs in resolve does not currently allow for an AWG-4/ ALC-4 output which would be needed for the AWG-4/ALC-4 to AWG-4/ALC-4 "LOG-To-LOG" Lut needed to make the "ALF4" look file with . https://www.reduser.net/forum/everything-else/off-topic/3791062-arri-4k-super-35-camera-will-be-launched-next-month?p=3826306#post3826306 Here's the Lut I made in Resolve with Ravengrade and the final ALF-4 look file. https://sendgb.com/QqZFRsiWm89

David, Here is a workflow with Screengrabs and instructions on REDUSER of how to do what you asked , since I think screengrabs are looked down upon here, the link is below. https://www.reduser.net/forum/everything-else/off-topic/3791062-arri-4k-super-35-camera-will-be-launched-next-month?p=3826306#post3826306 Here's the Lut I made in Resolve with Ravengrade and the final ALF-4 look file. I just pulled the grade out of my A** as a sample look so.... https://sendgb.com/QqZFRsiWm89

Thanks Josh! I thought it would be a big learning curve to go from Resolve to Baselight for Avid, but after watching your course and a few others online, it's been almost easy.

Thanks Tom for the correction!

I don't know if this was the correct use of the components provided in this tutorial or if Screengrabs are allowed on this forum if not please forgive the screengrabs and please take them down anytime you like. But I'm more of a Visuals learner so these are visuals of what i did if anyone is interested. I used a RED .R3d Sample clip and the FUJI 3313DI PFE lut in resolve for this example.

Kenny, Yeah and ACES Transforms as well. Sorry , the screengrabs were placed in the wrong order after correcting the post.

Is there anyway to create a 16bit Lut from the 16bit Hald file that has been provided on Windows. it seems only Lattice can do this. All of the Lut from Hald file programs and websites that I have found and used only create 8bit Lut files and seem to only accept 512 x 512 files resolution Hald files to build them from and not the 3584 x 3584 Hald file that was provided Thank you in advance..

Myth; Adding A LUT to an improperly exposed, poorly white balanced image with RGB issues is Color "Correcting".

Thanks, Nicolas

Hello everyone, new here. Bruno, here is the method I use for getting Avid Media Composer files in and out of Davinci Resolve.