Thomas Singh January 17, 2019 Share January 17, 2019 When I receive and import RAW camera footage, the clips are always log, but not this time. When I load in the files from the RED Dragon camera, the in-camera LUT is applied automatically. Any idea why? Link to comment Share on other sites
Kai Klassen January 20, 2019 Share January 20, 2019 (edited) check the raw tab on the color page. It may say 'decode using: camera metadata' so its applied to your footage But if the raw tab says 'decode using: project' it applies the settings that are dialed in in your project settings in the RAW section. Those settings are not directly visible in the color page, so you easily could start to work with unwanted presets, by accident. Still you could change the raw settings for each clip to get them as log footage, but it is a good idea to set the project-raw-settings as you want them to have, at the first place Sounds like you are used to debayer to a log format but now its set to 'Rec 709' in one of those raw sections. Edited January 20, 2019 by Kai Klassen 1 Link to comment Share on other sites
